What is Dikes Tool?
Dikes tool or Dykes tool or Diagonal pliers, from Jargon mainly used for cutting wires. This tool is also called a wire cutter. There is also an idiom on dike “when in doubt, dike it out.”
Here in this article, we can see the best dikes tool and even cheapest dikes tool for the electrical workers to cut wires easily.
Dikes are name blend from the term diagonal cutters, which are also called side cutters. Dikes cut by wedging and intending the wire apart. Instead of using scissors for shearing actions, this tool is the best option.
The tool cuts the jaws’ edges, intersects the joint rivet on a diagonal or angle, and called diagonal pliers. Jargons from the US electrical Industry describes diagonal pliers as “a pair of dikes tool.”
Cheapest & Best Dikes Tool
The best dikes tool or cheapest dikes tool used for cutting electrical wire is below with reviews.
Klein Dykes tool is a diagonal cutter with glow in the dark grip to locate the device in low light areas quickly or dark. The plier’s grip will charge in artificial and natural lighting. The tool cut ACSR, nails, screws, and hardened wires. It is with a high-leverage design.
The tool rivet is close to the cutting edge with 36% greater cutting and gripping power than any other plier designs. The tool has short jaws and beveled cutting edges to permit close cutting of nails, wires, and hardened wires.
KNIPEX Dikes tool, a highly leveraged diagonal cutter that is ideal for continuous and harsh use. The device holds an axel design that provides 20% force reduction required for reduced fatigue and easy to use tool. The tool’s main feature is the coordination of cutting edge angle, ergonomic handle shape, transmission ratio, and to cut all types of nails and wires easily with high-performance precision.
The diagonal cutters were built to last and with oil harden chrome vanadium steel. The precision-matched, induction hardened cutting edges cut the materials like nails, piano wire, ACSR, and other hard wires without changing the tools or damaging the cutting edges. The tool’s capacity is up to 11/64 inches for medium wire, up to 1/8 inches for hard, and up to 3/32 inches for piano wire.
IRWIN VISE-GRIP pliers are durably made from nickel-chromium steel with pro touch grips for extra comfort and reduce hand fatigue. The tool has induction hardened cutting edge and machined jaws for maximum gripping strength.
This dikes tool meets or exceeds ANSI specifications and backed by the IRWIN VISE-GRIP lifetime guarantee. The induction hardened cutting edge stays longer and sharper. The size of the diagonal cutting edge is 6 inches. This tool is one of the plumbing also essential for plumbers.
Whizzotech wire cutter is convenient and comfortable with a nonslip rubber handle and opening spring. We can easily cut memory wire, eye pins, headpins, small chains, cords, tiger tail, beading thin wire, and other electrical repair needs.
The dikes tool made with chromium-vanadium stainless steel. This diagonal cutting plier has a micro flush-cut side cutter with 4.5 inches. The tool is excellent for jewelers, electricians and also have a PVC coated handle for comfort.
Who uses Dikes Tool?
Dikes tool or diagonal cutters, or wire cutters are a useful but not essential tool. Many people use it as a fill-in-the-cracks tool, which is good at spinning wire ties, cutting the banding off a package, trimming the exposed end of a small nail or brad, or shortening the framing wire. So mostly electricians, jewelers, etc., will use the dykes tool as Hand Tool electrical and handworks.
Where did Dykes Tool come up?
Dykes Tool is another name for wire cutters. The name derived from a blend of term diagonal cutters.
These are also known as side cutters and diags. These Dykes tools are best friends for electricians and are handy and easy to use.